| 1. |
Interchangeability
of parts since cylinder dimensions are same for entire
range. |
1. |
As
cylinder dimensions vary, interchangeability not possible. |
| 2. |
Replaceable
cylinder liners. |
2. |
Cylinder
blocks have to be scrapped or rebored. |
| 3. |
Because
of fabricated body, easy access to internal parts. |
3. |
Large
openings are not possible. |
| 4. |
During
breakdown, total dismantling of compressor is not required. |
4. |
Total
dismantling of compressor which increases downtime,
and in turn cost. |
| 5. |
Initially
it takes less torque load. |
5. |
It
takes full torque load. |
| 6. |
Electricity
consumption is reduced by 25% because of capacity control
system. |
6. |
No
such facility is available and electricity consumption
is more. |
| 7. |
Runs
with induction motor because of hydraulic mechanism
system. |
7. |
Does
not run with induction motor system. |
| 8. |
Can
be serviced and spare parts replaced in your own place. |
8. |
Compressor
has to be taken to the workshop for repair. |
| 9. |
Equipped
with all safety switches. |
9. |
Does
not have this facility. |
| 10. |
Steel
body of the compressor makes it less heavy and less
space occupation |
10. |
Casted
body of the compressor makes it heavy and more space
occupation. |
| 11. |
In
steel and welding fabricated body, the oil is crystal
clear and pure. Because of this, the parts run for longer
time without giving any problem. |
11. |
Because
of casted body, the oil becomes black and dirty faster,
leading to faster damaged Parts |
